Describe what you want and watch it become a 3D model with a cutlist and photorealistic render you can export.
A real carcass — sides, tops, back, dividers and the joints between them. You cannot derive a cut list from a model with no construction in it.
A dimensioned drawing set — front and side elevation, overall and internal sizes, plinth height, in a title block with the scale on it. The sheet you pin up next to the saw.
Length, width, thickness, edge banding and grain direction per part. Fronts cut from one sheet are laid out so the grain runs continuously across them.
| Part | Size | Edging | Grain |
|---|---|---|---|
| Left side | 982 × 450 × 18 | 2 long | ↕ |
| Front 1 | 986 × 226 × 18 | 4 edges | ↔ |
| Front 2 | 986 × 226 × 18 | 4 edges | ↔ |
| Shelf | 964 × 440 × 18 | 1 long | ↔ |
Placed on the sheet with a 3.2 mm kerf and the banding allowance counted in. You see the waste before you buy the board, and usable offcuts are labelled.
Ø35 × 13 cup, auxiliary holes at 45 / 9.5, runner spacing, confirmats — coordinates taken from the manufacturer’s own documentation. This is the difference between a cut list and a part you can assemble straight off the saw.
Sheets, banding metres and fittings by orderable article number — everything a quote needs, already counted. We carry no supplier pricing, so you apply your own rates.
The piece in a room, rendered from the same model the cut list comes from. What the client approves is what you build.
Every file is derived from one manufacturing manifest, so the cut list, the panel DXFs and the machine code cannot disagree with each other. Solid models, per-part drawings and cut lists are validated; G-code and TpaCAD .tcn are an opt-in beta with no certified controller profile, and every file we write says which it is.
Eight things, all from the same model: a 3D model with real construction, a dimensioned general-arrangement drawing, a cut list with edge banding and grain, sheet nesting, a boring plan, a bill of materials, a photoreal render and CNC exports.
DXF panels, STEP solids, CSV cut lists, PDF drawings, IGES and STL. TpaCAD .tcn and G-code are an opt-in beta with no certified controller profile. Integrations →
From the fitting manufacturer's own documentation — Blum, Hettich, Häfele, GTV and others. A fitting is used in production only when it meets all seven production conditions, from the manufacturer's drilling to an orderable article code. Fittings →
Every design goes through a set of checks before it reaches you. Some stop a design outright, others advise. The list is generated from the code that runs the checks. Quality checks →
The guide explains how flat-pack furniture is put together — the boards, the holes and the hardware — with no workshop experience assumed. Guide →
No. You can start without an account, in the browser, with nothing to install.
No account needed to start. Nothing to install.